asterisk2billing.org

INSTALL :: RE: How to setup outgoing route

alinux — Wed, 20 Aug 2008 10:52:03 GMT

Author: alinux
Posted: Wed Aug 20, 2008 10:52 am (GMT 0)

Using SIP Show Channels from CLI

Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message
x.xx.xx.xx ...45.... 37d47d1e4ec 00102/00000 0x0 (nothing) No
1 active SIP channel

As for the trunk page

I did add the IP and the name + description the regular. One thing I might add is that if I do reinsert the IAX trunk, the call goes there..

Thanks

INSTALL :: error on i got on cli

hbirosel — Wed, 20 Aug 2008 10:34:56 GMT

Author: hbirosel
Subject: error on i got on cli
Posted: Wed Aug 20, 2008 10:34 am (GMT 0)

hello

i see a error on cli from my wholasale client and from a xlite user..

2billing.php|1: file:a2billing.php - line:317 - [AUTHENTICATION FAILED (cia_res:-2)]

those client are already sending calls and calls successfull.. but some of the calls have this error

2billing.php|1: file:a2billing.php - line:317 - [AUTHENTICATION FAILED (cia_res:-2)]

i check the number called and prefix all is correct..

i might the the reason ??

INSTALL :: RE: How to setup outgoing route

hbirosel — Wed, 20 Aug 2008 10:31:22 GMT

Author: hbirosel
Posted: Wed Aug 20, 2008 10:31 am (GMT 0)

provide the info on the add trunk..

and then

go to cli

check if the trunk is register ...

MISCELLANEOUS :: RE: Caching issues on 1.3.3

sjack55 — Wed, 20 Aug 2008 09:18:16 GMT

Author: sjack55
Posted: Wed Aug 20, 2008 9:18 am (GMT 0)

Does anyon have any comments on this? I would appreciate it.

INSTALL :: How to setup outgoing route

alinux — Wed, 20 Aug 2008 07:33:59 GMT

Author: alinux
Subject: How to setup outgoing route
Posted: Wed Aug 20, 2008 7:33 am (GMT 0)

Hi
I was trying to setup an outgoing route using A2B, I did go to trunks and deleted the IAX trunk since I dont need it and created a sip trunk but all I am getting is this error:
------------->
--- (12 headers 0 lines) ---
Really destroying SIP dialog '153929882a1834ef345414096c751af5@87.236.144.14' Method: OPTIONS
-- Playing 'prepaid-seconds' (escape_digits=#) (sample_offset 0)
a2billing.php: file:Class.RateEngine.php - line:1012 - app_callingcard: Dialing '//9613089187|60|HRgrL(200000:61000:30000)' with timeout of '200'.
a2billing.php:
a2billing.php: file:Class.RateEngine.php - line:1037 - app_callingcard: CIDGROUPID='-1' OUTBOUND CID SELECTED IS '0'.
-- AGI Script Executing Application: (Dial) Options: (//9613089187|60|HRgrL(200000:61000:30000))
-- Limit Data for this call:
> timelimit = 200000
> play_warning = 61000
> play_to_caller = yes
> play_to_callee = no
> warning_freq = 30000
> start_sound = (null)
> warning_sound = timeleft
> end_sound = (null)
[Aug 20 07:49:33] WARNING[27639]: channel.c:3025 ast_request: No channel type registered for ''
[Aug 20 07:49:33] WARNING[27639]: app_dial.c:1183 dial_exec_full: Unable to create channel of type '' (cause 66 - Channel not implemented)
== Everyone is busy/congested at this time (1:0/0/1)
a2billing.php: file:Class.RateEngine.php - line:1148 - [USEDRATECARD - FAIL =0]
-- Playing 'prepaid-dest-unreachable' (escape_digits=#) (sample_offset 0)

I think it is trying to search for a none-existing default route, since before this it was trying to pass through the IAX route.

I am using the same outgoing route on another context not related to A2B and that works great.

I simply need to know how to setup an outgoing route for my customers.

INSTALL :: RE: Problem With Authentication EDITED3

alinux — Wed, 20 Aug 2008 07:30:12 GMT

Author: alinux
Posted: Wed Aug 20, 2008 7:30 am (GMT 0)

No more problems thanks

REQUEST :: captcha suggestions

kieranmullen — Wed, 20 Aug 2008 07:16:18 GMT

Author: kieranmullen
Subject: captcha suggestions
Posted: Wed Aug 20, 2008 7:16 am (GMT 0)

1)perhaps have option for requiring one on login
2) Change existing forgot password and signup captchas to recaptcha
http://recaptcha.net/

helping blind people read is good.

I do not see why everyone would need their own captcha account so it could all go under the a2b account by defualt unless someone wants to change it.

Thanks!

KM
_________________
KieranMullen
http://360oregon.com

BUGS :: CDR show source UNKNOWN

hbirosel — Wed, 20 Aug 2008 06:45:17 GMT

Author: hbirosel
Subject: CDR show source UNKNOWN
Posted: Wed Aug 20, 2008 6:45 am (GMT 0)

my cdr problem..

on 10 calls of my client..

6 calls are showing correct username..
4 calls show only unknown

im talking on the SOURCE column.. on the CDR

REQUEST :: RE: hello how can i be a reseller of A2B??

hbirosel — Wed, 20 Aug 2008 05:50:41 GMT

Author: hbirosel
Posted: Wed Aug 20, 2008 5:50 am (GMT 0)

well asilby i will donate if i earn.. whish me luck..

any idea how much i can sell the A2B including a hardware. quadcore pentium , 2gb ram ..

BUGS :: RE: Hanging Up before authentication= Call Goes Through

za3toor — Wed, 20 Aug 2008 03:57:32 GMT

Author: za3toor
Posted: Wed Aug 20, 2008 3:57 am (GMT 0)

Thanks for your reply,

But i can't seem to get it to work,

i tried

Code:

if($agi->channel_status()){
$myres = $agi->exec("Dial $dialstr");
}

am i missing something?

how can i output the value of $agi->channel_status() to the console VERBOSE debug?

Thanks

CALLBACK :: RE: Different rates for the first leg of the cid-callback

azrul — Wed, 20 Aug 2008 01:57:47 GMT

Author: azrul
Posted: Wed Aug 20, 2008 1:57 am (GMT 0)

hallo,

i try to change my a2billing.php like below

from
$resfindrate = $RateEngine->rate_engine_findrates($A2B, $called_party, $A2B -> tariff);

to
$resfindrate = $RateEngine->rate_engine_findrates($A2B, $called_party, 2);

my tariff plan ID 2

i check all should be correct but when i debug i got

2billing.php|1|cid-callback: file:Class.A2Billing.php - line:1723 - [SET LANGUAGE() en]
a2billing.php|1|cid-callback: file:Class.A2Billing.php - line:654 - [CARD STATUS UPDATE : UPDATE cc_card SET inuse=inuse+1 WHERE username='351218497737']
a2billing.php|1|cid-callback: file:a2billing.php - line:429 - [TRY : callingcard_ivr_authenticate]
a2billing.php|1|cid-callback: file:a2billing.php - line:440 - [destination: - 032020440]
a2billing.php|1|cid-callback: file:a2billing.php - line:444 - [resfindrate: - 0]
a2billing.php|1|cid-callback: file:Class.A2Billing.php - line:654 - [CARD STATUS UPDATE : UPDATE cc_card SET inuse=inuse-1 WHERE username='351218497737']
-- AGI Script a2billing.php completed, returning 0

i check my rate card also correct i add rate prefix 0

please help.

VoIP Carrier :: RE: How do you import Carriex rates into A2B?

krzykat — Wed, 20 Aug 2008 01:40:42 GMT

Author: krzykat
Posted: Wed Aug 20, 2008 1:40 am (GMT 0)

Are they giving answer supervision on Pak and India? Can you tell me what carrier #'s you use? I assume the ones with the best Call Durations.

VoIP Carrier :: RE: Discussions about CarrieXchange

broadbandvoice — Wed, 20 Aug 2008 01:25:39 GMT

Author: broadbandvoice
Posted: Wed Aug 20, 2008 1:25 am (GMT 0)

Their ASR looks good because they make every call answer even when it does not go through. Check their ACD instead and you'll see how bad they're.

VoIP Carrier :: RE: How do you import Carriex rates into A2B?

gineta — Wed, 20 Aug 2008 01:10:30 GMT

Author: gineta
Posted: Wed Aug 20, 2008 1:10 am (GMT 0)

krzykat wrote:

haha - what routes of theirs? I don't know which routes of theirs is worth anything. Man they seemed like such good potential, but I certainly haven't been happy with them.

Uhm pakistan realluy work better of others and India in the rest ufff
I not use

VoIP Carrier :: RE: Discussions about CarrieXchange

gineta — Wed, 20 Aug 2008 00:54:51 GMT

Author: gineta
Posted: Wed Aug 20, 2008 12:54 am (GMT 0)

broadbandvoice wrote:

I have tried wire transfer and also credit card. I never had a problem with my card or bank account. They're service though is horrible and don't use proper supervision control and charge you for incomplete calls.

Last week I had an incident where customer dial just the prefix of a country which obviously is wrong but still got charged for 9 minutes. Becareful with them. I will not recommend anyone for their services.

I not but is teh only give me a normal ASR to bangladesh pakistan and india.
I try with others carriers more big a more expensive and I not get the ASR i need

if you not any good carrier to this country I apreciated
thanks

CALLBACK :: RE: ALWAYS CALLBACK

juniowww — Wed, 20 Aug 2008 00:54:08 GMT

Author: juniowww
Subject: resolve
Posted: Wed Aug 20, 2008 12:54 am (GMT 0)

use_dnid = YES

just this

VoIP Carrier :: Malawi mobile

nitzan — Wed, 20 Aug 2008 00:46:49 GMT

Author: nitzan
Subject: Malawi mobile
Posted: Wed Aug 20, 2008 12:46 am (GMT 0)

Hello all!

Does anyone have any recommendations for Malawi mobile routes? our current rate is 12 cent/minute and it's so-so. We have another rate which is 6 cents/minute but most calls are falsely answered. Does anyone know of anything inbetween? (grey route, but without the false answer crap)

Thanks!
_________________
Nitzan Kon, CEO
Future Nine Corporation
http://www.future-nine.com

VoIP Carrier :: RE: How do you import Carriex rates into A2B?

krzykat — Wed, 20 Aug 2008 00:46:47 GMT

Author: krzykat
Posted: Wed Aug 20, 2008 12:46 am (GMT 0)

haha - what routes of theirs? I don't know which routes of theirs is worth anything. Man they seemed like such good potential, but I certainly haven't been happy with them.

VoIP Carrier :: RE: Discussions about CarrieXchange

broadbandvoice — Wed, 20 Aug 2008 00:37:39 GMT

Author: broadbandvoice
Posted: Wed Aug 20, 2008 12:37 am (GMT 0)

I have tried wire transfer and also credit card. I never had a problem with my card or bank account. They're service though is horrible and don't use proper supervision control and charge you for incomplete calls.

Last week I had an incident where customer dial just the prefix of a country which obviously is wrong but still got charged for 9 minutes. Becareful with them. I will not recommend anyone for their services.

VoIP Carrier :: RE: How do you import Carriex rates into A2B?

gineta — Wed, 20 Aug 2008 00:31:55 GMT

Author: gineta
Posted: Wed Aug 20, 2008 12:31 am (GMT 0)

nitzan wrote:

I was asking myself the same thing, but there doesn't appear to be an easy solution other than creating an excel spreadsheet with all the rates (by hand) and importing it into A2B.

Another reason why we don't use CarrieXchange for most of our termination. I have better things to do in life than map out rates for the entire world in a spreadsheet...

jejej is true you need to make by hand
I use only few destination in this carrier and this is not a really rpoblem for me

VoIP Carrier :: RE: Discussions about CarrieXchange

gineta — Wed, 20 Aug 2008 00:24:09 GMT

Author: gineta
Subject: Re: CarrieXchange Alternate Service
Posted: Wed Aug 20, 2008 12:24 am (GMT 0)

visu wrote:

razor wrote:

Anyhow, I decided to contact my CarrieX Rep to discuss the issue, and I asked if they would consider accepting Western Union, MoneyGram, PayPal, or Email Money Transfer; and she relplied no, no, no, and no. She said that it was the companies policiy.

P.S. Since nobody has ever raised this issue, I assume that every one is comfortable sending their personal details (signature included) halfway across the world, to perfect strangers, and yet they don't even trust you.

Razor, I agree with you. We also tried to work with CarrieX but the payment condition itself sucks (lets not talk about route). We are also not comfirtable sending our card details unless third party payment system like paypal etc were involved. As a matter of fact, we told them them we will bear the charges but they did not agreed. Hence I will rate them as may be possible fraudster or incompletent.

In the web of Carrierx is the option banks transfer but this people never reply any of my tickets about teh bank account number etc.
Any by here make banks transfers or where is this info?

MISCELLANEOUS :: juniper firewall

gineta — Wed, 20 Aug 2008 00:20:39 GMT

Author: gineta
Subject: juniper firewall
Posted: Wed Aug 20, 2008 12:20 am (GMT 0)

any by here have experience with asterisk and juniper firewall?

MISCELLANEOUS :: RE: A2billing in UK

gineta — Wed, 20 Aug 2008 00:18:30 GMT

Author: gineta
Subject: uk
Posted: Wed Aug 20, 2008 12:18 am (GMT 0)

contac me when you like
please use the private msg

MISCELLANEOUS :: Caching issues on 1.3.3

sjack55 — Wed, 20 Aug 2008 00:13:29 GMT

Author: sjack55
Subject: Caching issues on 1.3.3
Posted: Wed Aug 20, 2008 12:13 am (GMT 0)

Folks,

After a loooooonnnng time, I just upgraded to A2B 1.3.3. What can I say, 1.2.3 really searved me well.

I am having an issue though with caching. If a user logs out of their account, they can still press the browser back button and see their info. Has anyone experienced. This happens regardless of what computer is used. Off course, if they shutdown the webpage and open it again, the details are gone. However, I think this is a flaw.

1.2.3 never used to do this. I am wondering if I have done something wrong.

BUGS :: RE: Hanging Up before authentication= Call Goes Through

stavros — Tue, 19 Aug 2008 23:29:37 GMT

Author: stavros
Posted: Tue Aug 19, 2008 11:29 pm (GMT 0)

You can use PHPAGI to ask Asterisk the status of the channel.